Frequency Spectrum Chart

Frequency Spectrum Dump  v.1.0

Frequency Spectrum Dump Inputs: mp3, wav, ogg, etc Scriptable, Visualization Output: csv file with the mean magnitudes of 255 frequency bands. Analyze audio files. The Frequency Spectrum Dump inputs are: MP3, WAV, OGG.The output is a CSV file with the ...

FFT Properties  v.6.4.0.0

Time series and frequency spectrum analyzer optimized for handling of very long signals. It features:

* Recording and playback with arbitrary real number sampling frequency with a real time sample rate converter of user configurable quality.

DigiPan  v.2.0

DigiPan provides a panoramic display of the frequency spectrum in the form of an active dial scale extending the full width of the computer screen. Depending upon the transceiver IF bandwidth, it is possible to 'see' as many as 40 to 50 PSK31 stations ...

WinSpec32  v.1 5

Winspec32 provides the functionality of an audio frequency spectrum analyser on a multimedia Windows 95 computer. It provides both time and frequency domain displays of audio data captured by a standard sound card. It has been written to aid in the teaching ...

Real Time Audio Analyzer & Oscilloscope  v.1 1

This program is an audio analyzer with FFT and n-th octave frequency analyzers and oscilloscope. The octave analyzer can show the frequency spectrum at 12th, 6th, 3rd and full octave resolution. (A standard license supports all resolutions). With the ...

Real Time Audio Analyzer  v.1.1

Real Time Audio Analyzer is an audio analyzer with FFT and n-th octave frequency analyzers and oscilloscope. The octave analyzer can show the frequency spectrum at 12th, 6th, 3rd and full octave resolution. (A standard license supports all resolutions).

Soundcard Oscilloscop  v.1 40

The frequency range depends on the sound card, but 20-20000Hz should be possible with all modern cards. The low frequency end is limited by the AC coupling of the line-in signal. Be aware, that most microphone inputs are only mono.

The oscilloscope ...

RX-PSK31  v.3. 1. 2001



Features:
- Easy to use Audio Spectrum and PSK31 decoding program. It decodes all popular PSK modes.
- Adjustable DSP and Spectrum settings for audio and frequency spectrum analysis or to set it for best decoding of PSK31 signals.

BrainStimPro Binaural Generator  v.4.0

0 color strobe 120 Options (BrainStimPro) is a Professional Medical Brainwave Tuning tool for medical personal, Using adjustable freq, base frequency, modulation, duration, programmable color strobe, 4 wave forms, Freq Ramps, audio to visual pulse ratio ...

Pocket RTA  v.1.0

This program is a real-time spectrum analyzer for your PC and Pocket PC. Uses include system calibration, monitoring of noise levels and testing of audio equipment. PocketRTA samples sounds picked up by the built-in microphone on the Pocket PC or the ...

BeaconSee  v.1 8

Using Fast Fourier Transforms, BeaconSee shows you the signal strength received from each of the 18 beacon transmitters as a plot of frequency spectrum against time. You can even detect beacon signals which are too weak to hear.

SBench  v.6.0.7.3860

All current Spectrum M2i and M3i data acquisition cards are supported.

The software is available for Windows and Linux. Both versions are based on the same source code to ensure that the Windows and the Linux version are equally provided ...

FASoft ParEQ  v.1 2

Using separate settings for left and right channels, the plug-in can 'spatialize' the sound for example by enhancing high frequency on one channel and boosting the lower ones in the other. The plug-in settings can be easily adjusted with the mouse using ...

Vocodex  v.1.0

Vocoding is the process of using the real-time frequency spectrum of one sound (Modulator) to modulate the frequency spectrum of another (Carrier). The vocoder engine consists of a series of bandpass filters that allow through only those frequencies detected ...

Fastsimcoal  v.1.1.1


-g --genotypic : generates arlequin projects with genotypic data
-p --phased : specifies that phase is known in arlequin output default: phase is unknown
-s --dnatosnp : output DNA as SNP data (0: ancestral or 1: derived)
-I --inf : generates DNA mutations according to an infinite site (IS) mutation model
-d --dsfs : computes derived site frequency spectrum (for ...

Pages : 1 | 2 >
Newest Reviews