Frequency Response Analysis
Advertisement
FilterLab v.2.0
FilterLab is an easy tool that allows you to design low pass, high pass, and band pass filters, showing the schematic diagram of a filter circuit with component values and displaying the frequency response. It has a filter selection wizard that allows ...
Advertisement
MaxxPlayer
MaxxPlayer is a plug-in for Windows Media Player which increases peak volume, improves clarity and stereo imaging, and extends bass and high frequency response. iVolume allows your system to play much louder without distortion. Quiet Mode adjusts for ...
Voxengo CurveEQ VST v.2 6
CurveEQ shows you actual filtering information: the filter's frequency response, and both input and output FFT spectrums. You can actually see what the EQ is doing with the sound. This, in turn, allows you to get the best from your mix and your ...
Sat-Coord v.1. 3. 2005
Sat-Coord is a software suite which assists in the processing of satellite network information filed with the ITU, frequency overlap analysis and C/I calculation.
The software has undergone significant testing and development over a period ...
Cypher Instruments CypherGraph v.1 2
Main features:
-Measure the frequency response (amplitude and phase) of electronic, electrical, electro-acoustic and other networks
- Impedance measurement of two terminal networks (including phase)
- Design and production testing ...
Voxengo CurveEQ v.2 6
CurveEQ shows you actual filtering information: the filter's frequency response, and both input and output FFT spectrums. You can actually see what the EQ is doing with the sound. This, in turn, allows you to get the best from your mix and your tracks.
SweepGen v.3.5.4
In conjunction with audio test instruments, you can make frequency response plots.
SweepGen uses the sound card in your PC to produce sinewaves that are mathematically correct almost to CD quality, indeed its more likely that the quality of your ...
Circuit Shop v.3.00
* Digital circuit design and analysis capability using digital sources, logic gates, flip-flops, timers, sequence generators, digital displays, ICs and digital oscilloscopes.
* Analog circuit design and simulation capability to perform ...
ScopeFIR v.5.0
ScopeFIR™ is the premiere software tool for Finite Impulse Response (FIR) filter design. It can:
- Design multi-band Complex FIR filters of the following types:Parks-McClellan , Windowed Sinc,Lth-Band, Raised Cosine, Maxflat, Cascaded Integrator-Comb, ...
FiltersCAD v.1.0
Features:
- Display Transfer Functions
- Frequency Response: Magnitude and Phase
- Active Circuit Synthesis for Twin T, Injection Resistor, and Sallen & Key.
- Easy to Read Graphical Circuit Displays.
- Textual Net Lists That ...
ScopeIIR v.5.0
It can design lowpass, highpass, bandpass, and bandstop filters, with frequency and gain characteristics you specify.Analysis
ScopeIIR provides a sophisticated set of plots and displays that let you fully analyze the characteristics of your ...
HOLMImpulse v.1. 4. 2002
HOLMImpulse is an application for measuring frequency- and impulse-response in amplifiers and microphones. Developed by Holm Acoustics, this program is intended for audio professionals, although amateurs with prior knowledge about frequencies and sound ...
Graphic Equalizer v.2009
It will then correct these variations by automatically increasing or decreasing the levels of attenuation at specific frequency intervals (usually 1/3 octave).The result is a nearly linear frequency response. For the listener, this creates more consistent ...
MAutoDynamicEq for Mac OS X v.5.6
MeldaProduction Filter Adaption (MFA) technology can actually perform your equalization for you based on an analysis of your recording, another recording or even your own 'drawn-in' spectral content! FEATURES: · State-of-the-art 7 band dynamic parametric ...