The Audio tone generation for binaural brainwave synchronization uses latest directX sound system oscillators, has 4 different waveforms and 20 brainwave frequency bands with 2X and .5X functions and up/down 1/5HZ buttons plus manual entry frequencies for a unlimited frequency spectrum for brain wave driving from Delta to Ultra Gamma, (1 to well over 15600HZ). Adjustable base frequency (10HZ to 15600HZ), phase modulation 0% to 50% channel reversible, 8 masking noise Options, (Unlimited with different file names) , Mixer controls, presets and programmable frequency controls. Also has a programmable color strobe (Stim / Background) stimulation section frequency driven with 16 independent different color pairs and sound to light ratio adjustment with 1/3 of full screen usage.

A new just released upgraded version now has 24 programmable frequency buttons to store your favorite frequencies and comes pretuned to four of the major Schumann's resonance frequencies to enhance amplification of the naturally occurring peak frequencies of the brain. By using base frequencies that are an even 10X the frequency of the Schumann's resonance, further enhancement of driving efficiency is attained.(see Below).

As of Ver 2.2 (this one is ver 4.0) all functions are now available from the pull down menus as well, (Well over 130), added better durational display information, more precise timer controls, and better color choice information. And rewrote the user manual. Added full Screen strobe functions, 3 X the programmable buttons (now 24 not 8), By clicking on the PrgSet button, the buttons marked A-H change from A-H to I to P to Q to X and back to A to H with separate Prg Set buttons (Also change name), (to store frequencies entered in the text boxes), and much more. As of Ver. 3.2 4 buttons give you instant access to the windows Wave recorder, Media Player, Mixer Console plus DXDiag for studio recording and mixing of the binaural sounds. Another first as of ver. 3.5 : you can now program 12 different custom sweep freq scans from low to high or high to low with different binaural and base frequencies with 1 to 60 min sweep times per freq. plus custom settingas well as upper and lower frequency limits.

As of Ver 4.0 the user now has 10 trigger Conditions and 10 Programmable Events for a total of 100 different event trigger combinations to control other programs, events, stimuli, etc. Useful for different audio functions, screen information, different visual stimulis, Pos rewards, slide shows or presentations. Or for therpy with images with psychophisological impact on the challenging situations in individuals lives, etc..

A visual section for on screen photolytic Stimulation or Relaxation driving with adjustable colors and sound frequencies for precise sound / color frequency octave matching (sound freq vs color freq). Now has 16 programmable color sets (foreground and background). As well as a sound to color harmonic adjuster for Video/Sound offset (flash rate of stobe vs sound freq rate ), for audio to video driving lobe synchronization freq differents. (Since Occipital Resolution freq (Sample rate) is different then auditorial lobe freq resolution). The above simply stated is that different colors for different frequencies and flash ratios for audio and visual lobe stimulation can be adjusted. Use with headphones for enhanced meditation or for enhancing better brain function (higher frequencies).Will run on any windows version.

Click here to go to the BrainStimPro Yahoo NewsGroup

Click here to go to the BrainStimPro Google NewsGroup

 Button Functions

Start : Starts sound Generator.

Stop : Stops sound Generator.

Basefreq: Toggles Base Frequency Function for all freq Buttons.

Zerovols: Zeros All Volume functions.

ColorOn: Starts Color Strobe.

ColorOff: Stops Color Strobe.

ColPrg : Switches Color Program buttons form 1-4, 5-8,9-12,13-16

1/2 Scrn:Runs Strobe in 1/2 Screen.

FullScrn: Runs Strobe in full Screen.

Mixer: Launches the sound mixer.

Recorder: Launches Wave Recorder.

MediaPlr: Launches Media Player.

DXDiag: Launches DX Diagnostics.

Color Set: Picks one of four color sets for the strobe.

1/2 Freq: Cuts sound Freq by 1/2.

2X Freq: Doubles Sound Freq.

Rev Chn: Reverses freq Channels (right / left).

Prg Set A,I,Q: Stores Programmable Buttons A,I,O Freqs from text boxes.

Prg Set B,J,R: Store Programmable Buttons B,J,Q Freqs from text boxes.

Prg Set C,K,S: Stores Programmable Buttons C,K,S Freqs from text boxes.

Prg Set D,L,T: Stores Programmable Buttons D,L,T Freqs from text boxes.

Prg Set E,M,U: Stores Programmable Buttons E,M,U Freqs from text boxes.

Prg Set F,N,V: Stores Programmable Buttons F,N,V from text boxes.

Prg Set G,O,W: Stores Programmable buttons G,O,W from text boxes.

Prg Set H,P,X: Stores Programmable Buttons H,P,X from text boxes.

PrgSet: Switches Programmable buttons to one of 3 sets of eight freqs.

Def Set: Programs Schumann Frequencies into buttons A-D.

LT/Snd L: Adjusts Light to Sound Freq Lower.

Lt/Snd H: Adjusts Light to Sound Freq Higher.

 Up 1 Hz: Raises freq 1 Hz.

Dw 1 Hz: Drops freq 1 Hz.

Up 5 Hz: Raises freq 5 Hz

Dw 5 Hz: Drops freq 5 Hz

Clear: Clears Freq Boxes

Clear All: Clears all 24 Programmable Freqs.

Reset: Reset DirectX Oscillators

Rebuild: Rebuild sound files if corrupted.

ScanUp: Scans a Frequency Sweep from low to high Frequencies.

ScanDn: Scans a Frequency Sweep From High to Low Frequencies.

ScanOn: Turns on the Frequency Sweep Section.

ScanOff: Turns Off the frequency Sweep Section.

Scan 1,5,9: Stores or Recalls Scanner Frequencies 1,5,9

Scan 2,6,10: Stores or recalls scanner frequencies 2,6,10

Scan 3,7,11: Stores or Recalls Scanner Frequencies 3,7,11

Scan 4,8,12: Stores or recalls Scanner frequencies 4,8,12

PrgSet : Puts the Scanner buttons into programmable Mode.

RunSet: Puts the Scanner buttons into the Play Mode.

Up Limit : For entering upper Limit.

Dw Limit : For entering lower Limit.

Enter : Enters Upper/Lower Limits.

Mask : Allow for 8 Mask sounds to be picked.

EvtCnd: Displays 10 Conditions for external controls.

EvtTrg: Displays 10 Trigger conditions for external controls.

PrgCmd: Selects Condition to Program for external Controls.

PrgTrg: Selects Event Triggers to Program for external Controls.

ProGrm : Programs Conditions and Events.

Wave : Picks either Sine, Saw, Square or Triangle wave forms.

Manual: Launches Owners manual.

Exit: Exit the Program Application.

For all Program functions just place the mouse curser over the buttons, textboxes or lights.

Planet Earth has a natural frequency for electromagnetic radiation called the Schumann resonances. The human brain also has resonant natural frequencies for EM radiation "in tune" with the planetary cycles. Schumann Resonances are actually observed by experiment occurring at several harmonic frequencies between 6 and 50 cycles per second. A cycle equals a Hz. Specifically they are found at 7.8, 14.1, 20.3, 26.4, 32.5, 39, and 45 Hertz, allowing a daily variation of around +/- 0.5Hz. Some of the higher percentages of brainwave frequencies in many brain lobes fall exactly in these Schumann's resonance frequencies.

Current research and monitoring Information of the Schumann resonances can be found at: http://www.ncedc.org/ncedc/em.intro.html,   http://www.ncedc.org/bdsn/em.overview.html
http://seismo.berkeley.edu/bdsn/em.overview.html   http://www.ncedc.org/ncedc/waveform-access.html  http://www.bibliotecapleyades.net/esp_ondas_shumman_2.htm   http://www.library.njit.edu/etd/1990s/1996/njit-etd1996-013/njit-etd1996-013.html

Volume discount to public, schools and Gov. and Businesses.

Click here to Buy BrainStimPro from Paypal

Program Specifications V4.00

4 Different Sound Waveforms (Sine, Square, Saw, Triangle)

20 Brainwave buttons 1 to 20 HZ (Alpha to Gamma)

Multiplier Buttons : .5X : 2X, Up/Dw 1 HZ, Up/Dw 5 HZ

Text entry Boxes, for total of 1HZ  to 15600HZ Binaural plus 1HZ  to 15600HZ settable base freq range, Chan Reversible.

24 Programmable Frequency Buttons  (8X3 I.D. changeable)

25 Mode Light Indicators (titles change with buttons)

12 frequency Sweep (ramp) Buttons with custom limits

10 Programmable Conditions for external control.

10 Programmable Events for external control.

100 Possible Condition/Event Options total.

8 Settable different masking noises can be used with any sound files, button selective. (white, pink, surf, rain, etc)

Over 300 different options total.

88 Buttons many multifunctional.

90 Pull Down Menu Options.

14 Text windows for information.

4 Volume Controls

16 Color Photolytic Sets, 1/3 or full Screen Color

Adjustable Frequencies, Adjustable Base Frequency, Vol, Modulation, Adjustable Masking Noises, Channel Reversible, Programmable Event/Triggers.

Adjustable Sound to Light Stimulation Ratios and color sets. Full and 1/2 Screen Photolytic Color Stimulation.

Plus MS Shells for Recording  and mixing sounds. (Wave recorder, Media Player, Mixer, Dxdiag.

Also includes a freeware unlimited time mp3 recorder.

For purchase information email scott93727@aol.com

To Purchase see below

To buy the software via paypal and use the link below the GUI image. Make payment note for BrainStimPro.

Price $35.00

Click here to Buy BrainStimPro from Paypal

After Paying with paypal I will get a notice of the

payment, then send me your hard drive serial number

(On the Reg software) and I will send you the

registration  code, usually within a few hours.

Installing

To install Brainbeatpro run install.bat which will copy sound files and the manual to the install directory and will then run setup.exe, make sure to have directx installed (Ver. 8 or above)(Ver 9.3 included), copy the pink noise file to the application directory (C:\progra~1\brainbeatpro),when installed in default directory. The buttons pretty much explain the functions when the mouse pointer is placed on them..

Usage

To start using BrainBeatPro install per instructions, to start any predefined frequency just click in the brainwave frequency buttons (1 to 20HZ), (M Alpha) is a good place to start and adjust volume, noise, tone, base freq, as desired, along with any mixer controls if needed (Mixer Button).. By clicking on the Color On button, the color strobe will start, if the color is black, click on the stim color and bkgrd color buttons to set the color, your favorite color is a good place to start. (Up to 8 color sets can be set) lower or higher freq colors may be used to assist in relaxation or stimulation. Use the color program <ColPrg> button to change programmable color buttons from 1-4 to 5-8. The color strobe can be set at 1/3 screen or full screen. To set the default Schumann's resonance frequencies click on the Default Programs Button (Def Prg), (for first time use only), this will program the first 4 programmable buttons (A-D), for the Schumann's resonance frequencies. When listening to the Schumann's resonance click the start and stop buttons until it sounds "soothing" indicating Schumann's resonance synchronization with your bodies waves.  (Software timing with your bodes waves synchronization). Further Audio and optical (Occular) synchronization can be had with the LT/SND H , and Lt/SND LOW Buttons. These buttons change to light to sound ratio.(for different auditoria to visual lobe freq differents). The Rev Chn Button should be used to set the higher freq channel (freq text boxes), to your dominate ear (best hearing ear).Base freq can be adjusted to run at octave frequencies or above or below active freq to assist in further simulative or depressive EEG responces.When using the white black colors some indication of simulative  or depressive assist can be determined by the colors seen in the "background of white flashes. Starting with rev 2.1 or later almost all the functions are also available from the pull-down menus. The use of a good quality headphone set is recommended in a resting body position, cords are available to run audio into your home stereo system if desired. Using the Rev Channel button set the higher frequency in the text boxes and the audio channel to your damanite ear (better hearing ear), the LT/SnD L/H buttons can be used to adjust the sound to light stim ratio for max comfort.

The newer version has 24 programmable freq buttons (8X3) that change I.D. when pressing the PrgSet button, to program any, just press the prgset button to pick the group of eight letters then enter the frequency into freq text boxes and then press the Prg set button with the letter for the button you want to program. To jump up or down in freq use the UP/DW HZ buttons. A Recorder Button brings up the wave recorder for making sound files.

As of ver. 3.6 a programmable scanner section allows low to high and high to low freq. scanning or ramp slopes. From the pull down menu pick the <TimeScan> option for time duration PER freq, then click the Scan Up or Scan Dw buttons for direction and then the ScanOn button, ScanOff to stop, , if a freq limit is desired click the Up or Dw Limit button and enter the freq limit followed by the enter key then press ScanOn.

To use special custom mask noises (white, pink, music, surf, rain, etc) Convert sound files to wav type, and name them mask1.wav to mask7.wav, place in the C:\program files\brainstimpro\ or the C:\progra~1\brainstimpro\. Then select the file at first application start up with the mask button (number shown on mask vol. control.

For conditions and event programming , press the <PrgCnd> button until the condition number you want to program appears in the title frame region, then enter the condition information and press enter,  press the <PrgTrg> button until the event number you want to program appears in the titles frame region, then enter the tiger information and press enter.  

For conditions information, the information is a special script language see the help menu options.

For trigger information, the information is the application shell string along with any needed switches. [c:\program.exe /f /r] without brackets.

Troubleshooting the Software

If at any time certain functions do not work its indicates the data storage files have gotten corrupted, to repair the software, pick <Freq Sets>  from the pull down menu and choose Del all data files, then pick Delete Install file, then restart the software and it will rebuild the data files. Other problems are listed under the help menu.

Some computers reporting hardrive numbers with a neg sign were getting an error 5 on the registration, the problems been fixed with the new demo, uninstall the old one and reinstall the new download, see below link.

Click here to DOWNLOAD NEW FREE Trial

Click here to DOWNLOAD VB6 SP6 Runtines for any errors.

Click here to Make a software improvement suggestion.

Download DirectX (Microsoft Site)  

Volume discount to schools and Gov. and Bussinesses.

Keywords: brainstimpro promed heath cd meditate Binaural Brainwave Stimulator cd sorfware buy for sale wave brainwave EEG EOG EKG brain lobe relaxation

Click here to DOWNLOAD FREE MANUAL

Click here to DOWNLOAD FREE Trial

Binaural.Info

Click on below link to ask questions about SW.
Email Me 

1)    This is a Brand New Program right from the Developer. Unregistered never used.
Autotree Pro Ver. 1.5 is a 32 Bit ( WIN95-XP) software Application for automotive diagnostics. The program written in a Tree format to make systematic and quick diagnostic checks a breeze, organized by area (Engine, Transmission, Electrical, Fuel, Emission, body, Clutch, Etc. ) Just click on the area of interest, then the problem and get instant repair suggestions to all your problems, covers all the major areas of car repair. (Engine, Fuel, Ignition,  Emission, Drive train, Transmission, Brakes, Clutch, Body, Interior, maintenance, Etc.) THIS PROGRAM HAS WELL OVER 600 GENERAL REPAIR SUGGESTIONS THAT APPLY TO ALL VEHICLES FOR OVER 300  SYMPTOMS PER VEHICLE. Great for Repair Shops and the Average Buyer as well. Buyers get free upgrades, Buyers may request the program be sent email via file attachment ( for 1 hour delivery ), (3 Meg File).

    In addition to a fast easy to use treelike structure, any section that requires such will refer  you to a notes section for a more detailed description of what to look for and how to fix it (Scroll able text boxes). The software also has many new engine emission checks ( How to read Engine CPU/ECU LED error codes which make complex electrical and emission problems easy to understand and detect which component has failed, ( Ford,  Chrysler, GM codes ).

   Many of the other Options it has include a repair Database (for note taking during repairs), A Mileage Calculator and record keeper (12 month), with charting Graphs (to compare mileage (before/after tune ups or to watch for the need of a tune up)), or to track tire wear,  blue book value changes or anything else you might want to use it for. A Maintenance Database for the date/Milage of the Last tune-up, oil change, Trans service, New Tires, Brake Work, Hose/Belt Inspection, Diff. Service., wheel bearing pack, Cooling system Service and more. Plus Popup Scroll Text Boxes for : Notes (Extended or Complex Repair Info.), Another sections tells what  Spares to Carry on long Trips, how to buy a good used car,  and abbreviations used in the software. A year charting function to chart any values that change by year (Car depreciation, tire wear, etc.) And much more. Program also has pulldown menus with Emission codes for ECU/CPU checking for Ford, Chrysler and GM.

   Written by a Programmer that was a journeymen mechanic himself for over 15 years (myself, With lots of on the job tricks of the trade understood). This program gets right to the point and does it fast with a very easy to understand interface. Buyers may also Email me (Email Form built into the application) for any non covered problems they have and I research it ( I have around 30 chilton manuals for such) and answer you right away as well as include this additional info in the next upgrade release provided FREE to those that email me with new problems.

-------------------------------------------------------------------------------------------------------------------------

2)    This is a Brand New Program right from the Developer. Unregistered never used.
CPUtree Pro Ver. 1.5 is a 32 Bit ( WIN95-98-ME-WINNT-XP-2K) software Application for Computer diagnostics. The program is written in Tree format to make systematic and quick diagnostic checks a breeze, Organized by region (Mainboard, Hard drive, CD ROM, Video, Sound, Modem, Power Supply, Floppy, Memory, Network, CPU, Ports, USB, IEEE, etc.). Just click on the area of interest, then the problem and get instant repair solutions to all your problems, Covers all the major areas of computer repair. Has over 500 repair suggestions in over 20 areas which are common to all brands of computers.

ALSO INCLUDES AN EXTENSIVE SECTION ON HOW TO UPGRADE ANY INTERNAL DEVICE. (Memory, drives. option cards, CPU, MB, etc.).

Great for Repair Shops and the Average Buyer as well. Buyers get free upgrades, Buyers may request the program be sent email via file attachment ( for 1 hour delivery ), (3 Meg File).

    In addition to a fast easy to use treelike structure, any section that requires such will refer  you to a notes section for a more detailed description of what to look for and how to fix it (Scroll able text boxes), has many new Error beep codes . .Many of the other Options it has include a repair Database (for note taking during repairs), A record keeper (12 month), with charting Graphs to compare operating costs, predicted upgrade needs or anything else you might want to use it for. A maintenance Database for the dates of the Last Scandisk, Defrag, Pwr Sup. Maint, (fan cleaning, etc.), upgrade, Browser File delete, Temp File Delete, User Specify, etc.) . Plus Popup Scroll Text Boxes for : Notes (Extended or Complex Repair Info.), Info.on abbreviations used in the software. A year charting to function to chart any value for drive upgrades, system cost, deprecation, etc.  Program also has pulldown menus with over 200 Error Beep codes for MB Post booting problems.

    Written by a Programmer that is a Computer tech as well,  (lots of on the job tricks of the trade understood). This program gets right to the point and does it fast, very easy to understand, Buyers may also write me for any non covered problems they have and such will be figured out by myself and answered by me and added to the next version along with a FREE upgrade covering such problems given to those that email me with new problems.

   Also Included in this application are System Information functions that give extensive IRQ, DMA, Port, Memory Address, Option Card, System Information, Video and Sound Specifications, Multimedia Properties, Extensive Hardware Specs, Modem, Network, Hard drive, USB, IEEE, Program Startup, Plus much more..

 
Best Buy Coupon

WebSite Link section

Vehicle Repair Software Site