Port Program Udp


Advertisement

Haxxio Haxxio UDP Serial Port  v.1.2.0.1

The Haxxio UDP Serial Port Redirector is the missing link between devices that speak UDP on your network and are thus 'connected' to your PC, via an Ethernet port (specifically UDP over IP) and Windows applications on the PC that can only talk to a serial ...

UDP Serial Port Redirector  v.1.2.1

The Haxxio UDP Serial Port Redirector is the missing link between devices that speak UDP on your network and are thus "connected" to your PC, via an Ethernet port (specifically UDP over IP) and Windows applications on the PC that can only talk to a serial ...





Advertisement

LookRS232  v.2.0.0.1

Look RS232 is a tool for debugging computer connection with peripheral devices using COM port, such as modem, mini-ATS, projector etc. Its easy to use interface guarantees an easy work with Com-port.

Look RS232 can send data through COM port, ...

Delphinus  v.3.0.1.0

Delphinus is a freeware 16-bit image processing program with many strong filtering algorithms. It also allows you to control your camera exposure time through RS-232 (serial) and LPT (parallel) port. Program was made as a part of "Pi of the Sky" project ...

Acid Scanner  v.1.0

It allows you to scan a single computer or multiple IP addresses for available shared resources, establish connection via tcp or udp protocol and sends and receive custom data (like telnet but more comfortable). Class C network can be scanned within ...

LNChat  v.2.0 Build 020000


LNChat does not require any internet connection, and it works across Ethernet port using UDP protocol. As this module is built with peer to peer architecture, it requires no Server and IP configuration.
Installing LNChat is very easy, and system ...

Key Extender Software  v.1.1.1

Client and server can connect by serial port or UDP transport. Also Key Extender supports "autostart with windows" function.

Dtella@Home  v.1.2.4

1:6473
Server Password: noneIf you have a router or firewall you must make a port forward or firewall exception for both a UDP port and a TCP port. The UDP port is how Dtella communicates with other nodes and is set using the
!UDP command in ...

Report Tool for Cisco Unified Communications  v.8.6.13.56

serial, model, MAC, MWI, status, location [ connected switch name and port], program version, status, ...
5. Support for UC version 8. Report Tool supports UC version 6, 7 and 8.RThe Uplinx Report Tool for Cisco Unified Communications saves you time ...

Wake On Lan Tool 2  v.2.0.1.2

The port used for sending the WOL UDP Broadcast is 7 (ECHO). Make sure that this port is routed to your local subnet broadcast address. Eg: if you use a class C network route the port 7 UDP to 192.160.0.255. (You may also specify ff:ff:ff:ff:ff:ff as ...

Multi Port Forwarder  v.4.10

This is a Swiss Army knife of port forwarding. It transforms network traffic whichever way imaginable. The traffic for forwarding is selected by a combination of: direction (incoming/outgoing), protocol (TCP/UDP), Port, IP (IPv4, IPv6, DNS name), MAC, ...

Port manager

Port Manager is free utility which shows all current TCP and UDP connections, those states and processes. It may be used on XP or later OS versions only. No installation is required. Simply download, unzip and run. Source code of console version of port ...

UDP Commander  v.1 5

UDP Commander is a software program designed for Windows platform (version 98SE or greater) able to interface with UDP30 interface and to communicate with products equipped with DUP port.
The DUP port is a proprietary interface, developed by LAM ...

TCP Port Toolkit  v.1.0

This program is a Winsock client software with data transmission, log and scripting features. You can use this software for implementing and debugging TCP/IP or UDP/IP based protocols. The TCP Port Toolkit can send and receive commands in textual and ...

Bill Serial Port Monitor  v.3.0T

This program allows you to view, log, test and analyse the activity of the serial RS-232 port. To monitor the serial protocol of two different serial devices. DSR, CTS, DTR and RTS can also be controlled. No programming or additional hardware required ...

Pages : 1 | 2 >
Newest Reviews