Multiplexer Nmea
Advertisement
IPaNema v.1.1.0
IPaNema reads any NMEA data from one of the serial ports (Com1-15) and delivers the NMEA data to any user selectable port and IP address using the UDP protocol acting as UDP server. It can also act as an UDP client, receiving NMEA sentences wrapped in ...
Advertisement
HS GPSDLL Library v.1.10
HsGpsDll is a Windows Dynamic Link Library which provides access to any NMEA-183 compliant GPS receiver via a serial communications port. HsGpsDll is designed for use from Visual C, C Sharp .NET, Visual Basic or other programming languages. HsGpsDll allows ...
DirectShow 3D Video Mixer Filter
The 3D Video Mixer Filter is a video multiplexer that accepts multiple input streams and outputs a single stream. This filter exposes an input pin for each incoming stream and uses the Microsoft DirectX 9 3D rendering capabilities. Each video input can ...
Eye4Software GPS Toolkit
All NMEA0183 protocol versions are supported, all NMEA 0183 can be filtered by NMEA type and talker ID. Information on GPS status can also be retrieved: GPS fix quality, Satellites used in fix, DGPS beacon ID, Satellites in view, Satellite azimuth, elevation ...
GPS Simulator v.1.0
Overview
GPS Simulator is software that generates a virtual GPS data
Used to develop and simulation of GPS applications
-Save testing and development time
-No location restriction or work everywhere
-No GPS device needed
Feature
Easy routing
Selectable map(7EA Map)
Support speed control
Support 10EA NMEA protocol messages(GGA, ...
Bungee v.6 1
Bungee uses the serial COM port to operate with any GPS receiver conforming to NMEA-0183 v2.0 or later (GPRMC, GPGGA, GPGLL)
Bungee links and synchronizes photographs recorded in JPG (jpeg) format, and will correct any errors due to time zone ...
GPSSIM v.2.2.0.1
GPSsim plays back NMEA data that was saved previously. It is also possible to generate custom NMEA data.
GPSsim allows you to test various PC-based navigation programs as well as use it as data logger application to track vehicle location ...
NavMonPc v.4.0
NavMonPc is a Windows program for the capture, display, and playback of NMEA-0183 data. The user interface is optimized to run on a low-power, small-format 'netbook' style of computer, but it will operate on any Windows-compatible machine. It is not intended ...
Kinomap GPS File Fixer v.1.0
Kinomap GPS File Fixer allows you to process some treatments on GPS file:
- convert almost any GPS file to standard NMEA 0183, compatible with Kinomap
- fill the gaps between points when your file is not 1Hertz: the extra point will be recreated ...
GPSCommunicator v.2.0.5
GPSCommunicator is a FREE utility to visually represent NMEA GPS position data in realtime. It works with NMEA 0183 GPS receivers connected via a serial port. GPSCommunicator has the following features:
- Vessel position display over moving map.
...
Maretron N2KAnalyzer v.1 5
N2KAnalyzer® is a software tool, which gives you a detailed view of all of the devices on a NMEA 2000® network, and lets you perform an enormous variety of configuration and troubleshooting tasks. All you need is a PC running Windows and a Maretron ...
GVConverter v.1.0
With this program you can convert NMEA log in format GVN, generated by GeoVisu. GVConverter converts all files at format GVN presents in source directory and its sub-directories. It replicates source directory tree-structure into destination directory.
Falcom Stepp Configurator v.2.0.1
NMEA sentences can be used to send commands or configuration data to the Stepp
device. The Stepp Configurator console can be used to send the sentences to the device. The console can also be used to monitor the sentences used by the Stepp
...