Hitec Servo
Advertisement
HPP-21 v.1.0
Looking for a low cost alternative to get the most out of Hitec's programmable digital servos? The HPP-21 Digital Programmer and Servo Tester allows you to access all the programable features right from your PC.
Features
- PC Programmer ...
Advertisement
UPAR v.1 10
UPAR is a program for parameterization of the UHU servo control microprocessor. The program communicates via an arbitrary COM interface to the processor. On a diagram window in an analysis mode, the possible tracking error can be visualized.
ServoSoft v.2.9.188
SERVOsoft is an indispensable tool for drive systems suppliers, machine manufacturers, mechanical, electrical and application engineers who work with servo systems.
SERVOsoft sizes complete servo systems, not just a single axis motor and inverter, ...
RcCAD v.4.7.0.3
RC CAD is an acronym for 'Radio Control - Computer Aided Design'. This software is specially designed to help modelers to create airplanes. It supplies a real-time 3D visualization of the model you are designing.
RcCad is:
- Easy to use.
IPM Motion Studio v.2 2
IPM Motion Studio is an advanced Windows IDE platform for the set-up and analysis of motion control applications with the Technosoft Intelligent Servo Drive family.
With IPM Motion Studio, you can:
- Identify your motor, sensor and load parameters,
...
HPP-22 v.1.0
The HPP-22 will enable you to connect your Hitec radio equipment to your PC, allow you to upgrade the firmware in selected Hitec radios and receivers, adjust a setting and even download telemetry data collected from the plane using an optional Hitec sensor ...
Lynx SSC 32 Terminal v.1 11
LynxTerm makes it easy to quickly test all functionality of the SSC-32 Servo Controller.
Features:
-COM port communication code now fully protected from exceptions (will avoid some very rare program crash).
- Pulse trackbar now sends commands ...
ALPHA5 Series Loader v.3 2
ALPHA5 Series Loader allows you to monitor, enter data, perform test operation or others of the ALPHA5 Series servo system on the PC screen. The software has a pretty easy to use interface and it also has a built in parameter converter to make your job ...
Quick Tuner v.2. 2. 2018
Quick Tuner™ is Applied Motion's servo tuning and configuration tool, used to setup and tune all Applied Motion servo drives.
Quick Tuner™ comes with a built-in sampling oscilloscope, status and alarm monitoring, preloaded tuning files ...
PulsePar v.1.1
The period, duty and phase of each channel are adjustable so as to be used in PWM systems as well as in testing servo and stepper (stepping) motors. If you have an old PC, boot it by dos to run PulsePar and control it by SeriCon on your GUI PC through ...
Robotic Arm Control v.32
A java/swt application that can control up to a six axis robotic arm using common serial servo controllers. The application can be run in client/server mode to enable the robot to remain in a static, wired location while controlled by a wifi laptop.
SEEtron Mini SSC controller Java library v.1.2
seeetron-ssc is Java source code for controlling the SEEtronics mini-SSC servo controller board (see: http://www.seetron.com/ssc.htm). The board itself does not come with Java support, so this project provides that third-party support.
CoolTerm for Mac v.1.1.2000
CoolTerm is a simple serial port terminal application (no terminal emulation) that is geared towards hobbyists and professionals with a need to exchange data with hardware connected to serial ports such as servo controllers, robotic kits, GPS receivers, ...
20-sim v.4.1.3.4
20-sim is a modeling and simulation program that runs under Microsoft Windows. With it you can simulate the behavior of dynamic systems, such as electrical, mechanical and hydraulic systems or any combination of these.
It fully supports graphical ...