Software Developed by worldwind.arc.nasa.gov
View Volume v.1.0
View Volume can show you the volume for surfaces on the globe, demonstratethe World Wind Java SDK support for rendering globes in multiple software windows. World Wind automatically shares resources wherever possible across multiple windows in a
TunnelSys v.1.0d
TunnelSys combines three computer programs, the design and wind tunnel test programs, and a post-processing software to plot the results from the wind tunnel test.
TunnelSim v.1.0g
TunnelSim solves the continuity equation for a geometry that you specify using sliders and input boxes. The analysis is limited to incompressible, inviscid, one-dimensional flows,
Terrain Profiler v.1.0
Terrain Profiler shows the terrain profile layer in action with its various controls. It allows you to view a realtime section profile graph for any place on the planet, at any scale - continent, country or mountain range, just by moving the mouse.
Scankort Denmark Data v.1.0
Displays high resolution imagery from Denmark. Scankort Denmark Data demonstrates high resolution imagery (0.2 meters per pixel) and elevation data (1.6 meters per pixel) served by the World Wind WMS,
KiteModeler v.1.1
KiteModeler works in three modes: Design Mode, Trim Mode, or Flight Mode. In the Design Mode you pick from five basic types of kite designs. You can then change design variables including the length and width of various sections of the kite.
Isentropic Flow Calculator v.1.0
Variables include the Mach number, static to total pressure, temperature, and density ratios, dynamic to static pressure ratio, critical area ratio, corrected airflow per unit area, Mach angle, and Prandtl-Meyer angle.
FoilSim 3 v.1.4b
The Airfoil View Panel is a simulated view of a wing being tested in a wind tunnel with air moving past it from left to right. Students change the position and shape of the wing by moving slider controls that vary the parameters of airspeed,
EngineSim v.1.7
EngineSim works in two modes: Design Mode or Tunnel Test Mode. In the Design Mode, you can change design variables including the flight conditions, the engine size, the inlet performance, the turbo machinery compressor and turbine performance,